Penetration Welding

discussion concerning fastening 4130 chromoly steel on web forums and discussion boards. however apart from all the questions about pre-heating, filler metals, and conductor sort and size, Weld What concerning testing?
How does one recognize you're obtaining enough penetration in your welds. The short answer is-you cannot. you'll ne'er be completely positive you succeed the proper quantity on some weld penetration welds while not damaging the slicing and dicing and metallographic testing. however the nice news is that you simply is pretty darn positive.
By running the take a look at welds victimisation a similar actual material thickness and joint style, so by following the procedures that letter, you'll be pretty darn positive that you simply area unit sensible welds.

The following is the basic procedure to test the welds on the chromoly steel 4130:
- Determine the different weld configurations with which you need to test
- Prepare a weld joint with the exact same way as you would for production welds.
- Weld joint test and write down all the settings such as heat if used, the electrical current, electrode type and size, filler metal type and size etc.
- After the test welds and cool completely, specify multiple locations to examine the cross sections
- Part of the test welds using a slitting wheel.
- Poland weld test section ranging from 180 grit silicon carbide coarse, then 240 320, and finally 400 grit paper.
- Swap with acid and muriatic Q-tip as used in the pool (to follow all the recommendations listed on the MSDS for the safety of acid)
- Quickly rinse with baking soda and water solution to neutralize
- Check the welds using a 10x power
If the penetration is suitable, you currently have a fastening procedure for fastening 4130 chromoly is well-tried. If this procedure is followed and {also the} welds were also examined visually, you'll be pretty darn positive you've got adequate penetration and weld quality.

Laser Configuration

Laser Head

At the heart of the system is U.S. Laser's unique laser head. The laser head is based on a single lamp, single ellipse, close-coupled design, optimized for maximum pumping efficiency.  The design produces up to 700 watts with a small diameter (6.3 mm) rod.  The single lamp reduces consumable costs, while the high efficiency reduces the energy and cooling requirements as well.

The laser head design allows for easy cascading of heads, in a series periodic resonator.  Single and two-head systems are standard, and four-head systems are available.


An important feature of the design is that it is tunable: the output power can be smoothly varied from <20% to 100% of rated power without any anomalies in the beam characteristics.


U.S. Laser can also provide high brightness variants of the basic lasers, where the maximum power has been slightly reduced to significantly improve the beam quality. This is especially useful in laser cutting.



Power Supply -
 Cooling Console            

The electronics and cooling system, in standard systems, are housed in a caster-mounted console.  The closed loop cooling system features a proportioning valve controller to maintain constant head temperature, and a high efficiency heat exchanger for connection to external cooling water/chiller. 


The electronics include a high efficiency switching power supply, and a control unit with status monitoring and protection.  All of these lasers may be computer controlled via digital and analog inputs.  Optional IEEE 488/RS232/RS422 computer interfaces are available.



Optical Enclosure

The laser heads, in standard systems, are contained in an enclosure consisting of a tooling plate base and a hinged, interlocked cover.  An optional air filtration system provides a clean, positive pressure, environment for the optics, to protect against environmental dust.


       
Laser Beam Delivery  

U.S. Laser's High Power CW Lasers are available with both conventional and fiber optic beam delivery systems. Particular attention was paid to power handling and transmission capabilitiy to maximize power on target, and minimize optical element heating. All lens elements are fused silica, and are sized based on the full beam diameter or fiber numerical aperture.All surfaces are high damage resistant antireflection coated to provide minimum power loss.



Integrated Cabinet Systems 

Multiple headed systems are also available with an integrated cabinet. These systems fully enclose the laser head and optics, power supplies and cooler in a common environmentally sealed enclosure. The laser head and optics are mounted on a granite base to insure maximum stability, and the optics are water cooled. The interior of the cabinet is temperature stabilized for use in harsh factory environments. The laser and optics are easily accessible for service and alignment from the hinged cover assembly, while removable panels provide access to the rest of the system. Normally the system is controlled and monitored via an external control computer which is supplied by the customer. An optional touch screen control box is also available.


Work Area Enclosure                             

U.S. Laser offers a variety of standard and custom work area enclosures to complement the high power lasers.  CDRH Class I and Class IV enclosures are available.  The laser systems can also be easily integrated into existing CNC or robotic machines. U.S. Laser manufactures high power CW Nd YAG laser systems, equipment and machines for laser welding, laser cutting, cladding and heat treating applications
Standard laser enclosure shown with optional